Dongxing New Material Technology
- All
- Product Management
- News information
- Introduction
- Enterprise outlets
- FAQ
- Enterprise Video
- Enterprise Atlas
Dongxing New Material Technology
News
Dedicated to the development and production of speciality surface coatings
The real car coating should be inorganic coating
Release time：2023-12-15 13:41
Classification： Industry dynamics
The real car coating should be inorganic coating, that is, crystal glass coating that will never oxidise. Only inorganic coating, is covered in the car surface coating layer, will not be ultraviolet light, acid rain and other external factors oxidation and disappear, vehicle normal use of a single protection of the paint up to 1 year or so, so it can be called car coating. Its coating method in order to adapt to the needs of the popularity of automotive beauty shops, do not need to be cured at high temperatures in the oven, as long as the chemical reaction with the moisture in the air, it can be cured to silicon dioxide (SiO2) as the main component of the crystal glass coating layer.
Car coating is based on the traditional polishing process, the use of special spray guns, coating products evenly sprayed on the surface of the car paint, and then use a special sponge using a spiral coating method to make the liquid liquid evenly coated in the car, followed by a cotton towel for rubbing. After the car coating, the paint surface is more resistant to oxidation, abrasion, corrosion and high temperature, and the film layer is more evenly distributed and delicate, with higher hardness and longer-lasting brightness. Turning the car paint into a continuous surface, the overall paint surface density increases. At the same time, it also brings a good stacking performance, that is, after stacking countless times between the layers does not produce interface, not to mention the phenomenon of "skinning". When the product is applied to the surface of the car paint in the natural environment, the molecular structure of the organosilicon under the action of the wonderful changes, that is, from the chain structure into the molecular chain chain and chain cross-links between the mesh structure, as if the wool knitted into a jumper, like an invisible continuous net, the car paint protection. This change in molecular structure enhances the physical, chemical and mechanical properties of the product. It makes the car surface appear bright and long-lasting, feel like silk, elegant and noble ideal effect. It gives the characteristic light of sunlight on water.
Latest information
Recently, Suzhou Industry and Information Technology Bureau announced Jiangsu Province 2023 speciality special new small and medium-sized enterprises and 2020 annual speciality speciality new enterprise review through the enterprise list, Phoenix Town, a total of 11 enterprises were selected, of which Suzhou Womei Biological Co. This is the first time in phoenix town the same batch of selected enterprises reached double digits, to achieve this year's speciality special new enterprise "bumper harvest".
2024-03-25
Application and production of anti-glare treatment for glass
Glass is widely used in modern times and has always been a product in high demand. Through the use of specific treatments, we are able to both utilise the properties of glass and compensate for its shortcomings, no longer being constrained by its natural properties. Glass is originally a highly reflective material and therefore prone to light pollution. However, there is now a new type of anti-glare glass, by the direct sunlight when the reflection is not strong, will not sting the human eye, so commonly used in some of the screen display requirements of the higher occasion. Next, we will introduce the main applications of anti-glare glass, as well as the production method of anti-glare glass.
2024-02-06
Influential factors for the development of China's fluorine material industry
Our country has acceded to the WTO and is required to provide most-favoured-nation (MFN) treatment to other member countries in accordance with the relevant provisions of the WTO. With the entry of more foreign companies, competition in the industry will become more intense. The production costs of large foreign companies will be further reduced due to advanced technology and cheap local labour in China, which further puts them in a favourable position in the competition. In the international market, the grade of our products and the international market demand is still a distance, into the international market is still quite difficult. In addition, because fluoroelastomer and its related products are mainly used in automobile manufacturing industry, petrochemical industry, machinery manufacturing industry and home appliance industry, so the organic fluorine industry is affected by the chemical industry, automobile, home appliance, machinery manufacturing and other industries development situation. China's accession to the WTO will bring different degrees of challenges and opportunities to these industries, which in turn will have an impact on the production and operation of fluorine materials.
2024-02-06
Contact Us
Floor 2, Building F, Kechuang Park, Free Trade Zone, No.36 Huada Road, Jingang Town, Zhangjiagang City, Jiangsu Province, China
SEO | Business License Powered by:300.cn